Insulating Glass Units 1
Insulating Glass Units 2

Energy Glass / Insulating Glass Units

Insulating Glass Units

An insulating glass unit (double glazing) is two or more glass panes held apart at the edges by a spacer bar and sealed airtight in a factory. Dry air or argon between the panes slows heat flow. Isıcam is a Şişecam brand, also used in Turkey as the name for all double glazing.

Technical Features & Advantages

  • Two or more panes, a spacer bar and a dual edge seal
  • The cavity is filled with dry air or argon gas
  • Argon filling lowers the U-value of the same unit
  • Used with Low-E glass, it cuts heat loss markedly
  • Can be made as safety glass with tempered or laminated panes
  • Size, glass thicknesses and cavity are set to order

What is double glazing made of?

A unit has five parts. Panes are usually 3 to 10 mm thick, tempered or laminated where needed. A desiccant-filled spacer bar keeps them apart. Butyl (polyisobutylene) on both spacer sides is the primary seal, and the panes are pressed onto it. Outermost is the secondary seal: polysulfide (known in the trade as Thiokol), polyurethane or silicone.

Butyl limits gas loss and water vapor entry. The secondary seal holds the unit together and keeps the butyl in place. The desiccant absorbs moisture trapped during production, preventing fog on the inner faces in cold weather. In gas-filled units, argon replaces the cavity air during production.

  • Panes (float, Low-E, tempered or laminated)
  • Spacer bar (aluminum or warm edge)
  • Desiccant (inside the spacer)
  • Primary seal: butyl
  • Secondary seal: polysulfide, polyurethane or silicone

How well does double glazing insulate?

The U-value (W/m²K) measures insulation: heat passing through one square meter of glass per degree of indoor-outdoor temperature difference. Lower is better.

Argon conducts heat at about 67% of the rate of air, so it lowers the U-value. A manufacturer technical note gives 2.7 W/m²K for uncoated 4-16-4 double glazing. For Isıcam S units with Low-E glass, Şişecam gives 1.6 (air) and 1.3 (argon) at 4+12+4, and 1.3 and 1.1 W/m²K at 4+16+4.

Widening the cavity helps only up to a point. Most units perform best at 16-19 mm, beyond which air circulates between the panes and carries heat.

Why does double glazing fog up?

Where the condensation sits shows the cause: of three cases, only one is a fault.

Between the panes: the edge seal has failed and the desiccant can no longer absorb moisture; a sound sealed unit has no condensation inside. This fog cannot be wiped off, and usually only a new unit fixes it.

On the room-side face: the unit is sound; the room air is too humid for the glass temperature. Ventilation, extractor fans in bathroom and kitchen, heating, and keeping heavy curtains 15-20 cm from the glass reduce it.

On the outside face: natural, not a fault.

How thick should double glazing be?

Thickness is written as a build-up: 4+16+4 is two 4 mm panes and a 16 mm cavity, 24 mm in total. No single rule applies; the choice weighs glass size, wind load and the thickness the frame accepts. For sound insulation, panes of different thickness or laminated glass can be used.

Weight comes from the glass alone, not the cavity: each 1 mm of float glass is about 2.5 kg per m², so a 4+16+4 unit (8 mm of glass) weighs about 20 kg per m².

When ordering, give the width and height of each unit, thickness and type of each pane, cavity width and any gas filling.

Is Isıcam the same as double glazing?

Same structure, different name. Double glazing and insulating glass unit are generic; Isıcam is a Şişecam brand for units by Isıcam Authorized Manufacturers under Şişecam supervision, in three series: standard C; S, with heat-control coated Şişecam Low-E glass; and K, with heat and solar control coated Şişecam Solar Low-E glass. Şişecam states a 10-year authorized manufacturer warranty against manufacturing defects for Isıcam units.

Double glazing at Salt Cam

Salt Cam has operated since 1930. Its head office is in Mersin and its production plant is in the Mersin Tarsus Organised Industrial Zone; it has 51,000 m² of covered area in total. It produces and sells insulating glass units, is an authorized Şişecam dealer and has made aluminum spacer bars (Elit Profil) since 2016.

Prices are not listed because glass prices change often. Price depends on unit size, glass thickness and type (Low-E, tempered, laminated), gas filling and quantity. For a quote, send dimensions to +90 324 324 39 39 or saltcam@saltcam.com.

U-values of double glazing units (W/m²K)

Build-upGlass typeCavity fillU-value
4-16-4Uncoated float glassNot stated2.7
4+12+4Low-E (Şişecam Isıcam S)Air1.6
4+12+4Low-E (Şişecam Isıcam S)Argon1.3
4+16+4Low-E (Şişecam Isıcam S)Air1.3
4+16+4Low-E (Şişecam Isıcam S)Argon1.1

The uncoated value comes from a manufacturer's technical note, which does not state the cavity fill. The Low-E values come from the Şişecam Isıcam S series performance table (EN 673). A lower value means better insulation.

Applications

  • PVC, aluminum and wooden windows
  • Door glazing
  • Curtain walls
  • Roof and ceiling glazing
  • Glass balconies with insulating glass
  • Interior and exterior partitions

Related standards

TS EN 1279
Turkish adoption (TS, Turkish Standard) of the standard for insulating glass units in buildings; sets dimensional tolerances, moisture penetration and gas leakage tests, edge seal tests, conformity evaluation and factory production control.
EN 673
Gives the calculation method for the thermal transmittance (U-value) of glass; the U-values in manufacturer tables are given by this method.

Frequently asked questions

Why does double glazing fog up?

Fog between the panes means a failed edge seal and saturated desiccant, a fault usually needing a new unit. Fog on the room-side face means a sound unit and humid room air; ventilation and heating reduce it. Fog outside is natural.

Is Isıcam the same as double glazing?

Yes, in structure: both are two or more panes separated by a spacer bar and edge-sealed. Double glazing is generic; Isıcam is a Şişecam brand for units by authorized manufacturers under Şişecam supervision, also used in Turkey for all double glazing.

How thick should double glazing be?

No single thickness is right; glass size, wind load and frame capacity decide it. Thickness is written like 4+16+4: two 4 mm panes and a 16 mm cavity, 24 mm in total. Most units insulate best at 16-19 mm.

How much does 1 m² of double glazing weigh?

Count only the glass; the cavity adds nothing. Each 1 mm of float glass weighs about 2.5 kg per m²: a 4+16+4 unit (8 mm of glass) about 20 kg per m², a 6+16+6 unit (12 mm) about 30 kg.

Does double glazing need argon gas?

Argon is optional but improves insulation; it conducts heat at about 67% of the rate of air. For its Low-E 4+16+4 unit, Şişecam gives a U-value of 1.3 W/m²K with air and 1.1 with argon.

What affects the price of double glazing?

Price depends mainly on unit size, glass thickness and type, gas filling and quantity; Low-E, tempered or laminated glass affects it. Glass prices change often, so Salt Cam quotes prices based on dimensions.

Request a quote for price and sizes

Glass prices change frequently, so we do not publish prices. Send us your sizes, glass type and quantity and we will send a quote.

Related products

Sources

  1. Insulated glazing, Vikipedi
  2. Isıcam Nedir?, Şişecam Isıcam
  3. Isıcam Sistemleri S Serisi, Şişecam Isıcam
  4. Low-E glass, Guardian Glass
  5. Condensation: Some Causes, Some Advice, Glass and Glazing Federation
  6. BS EN 1279-5:2005 Glass in building, Insulating glass units, Part 5: Evaluation of conformity, BSI
  7. NGA Publishes Updated Glass Technical Papers, National Glass Association
  8. BS EN 673:2024 Glass in building, Determination of thermal transmittance (U value), Calculation method, BSI

Written by: Salt Cam Technical Team · Last updated: 16.11.2026