Low-E Glass
Low-E glass is float glass with a thin, almost invisible coating on one surface. Low-E means low emissivity. The coating reflects most heat radiation (infrared) back but lets visible light through. Low-E glass is mostly used in an insulating glass unit (double glazing), where it cuts heat loss through the glass.
Technical Features & Advantages
- A thin, almost invisible coating that reflects heat radiation
- Lets most visible light through
- Lowers the U-value markedly when used in double glazing
- Available as heat control and solar control types
- Soft-coated types go on a cavity-facing surface of the unit
- Can be combined in one unit with laminated, tinted or reflective glass
What is Low-E glass, and what does the coating do?
Every surface radiates heat. Emissivity rates how much, on a scale from 0 to 1. Uncoated float glass is high, about 0.91, so it passes room heat outward easily; aluminum foil is 0.03.
A Low-E coating lowers the emissivity of the glass, so heat tends to stay on the side it came from: room heat stays in during winter, and less outdoor heat gets in during summer. Most visible light still passes, so the room does not darken.
How is a Low-E coating made? Hard vs soft coating
There are two methods. In a hard (pyrolytic) coating, fluorine-doped tin oxide is applied at high temperature while the glass is made at the plant. The coating fuses with the glass, resists wear and is generally cheaper.
In a soft (sputtered, magnetron) coating, the glass passes through large vacuum chambers that lay down 5 to 10 or more thin layers, including silver layers. A manufacturer technical note puts the coating at about 500 times thinner than a sheet of paper. Soft coatings insulate better but are affected by moisture and air, so they go inside an insulating glass unit, facing the sealed cavity.
Heat control or solar control Low-E?
Heat control Low-E glass mainly keeps room heat inside. It lets most solar heat in, which is useful in winter. It suits cold climates and facades where solar heat gain is wanted.
Solar control Low-E glass also limits solar energy entry, besides insulating. It is used in hot climates and on sun-facing facades that overheat in summer, and it reduces the air conditioning load.
Şişecam makes them as Şişecam Low-E and Şişecam Solar Low-E. According to Şişecam, its Isıcam S series with Şişecam Low-E glass cuts heat loss by 50% versus ordinary double glazing, and the K series with Şişecam Solar Low-E glass cuts heat loss by 50% and solar heat entry by 40%.
Which surface should the Low-E coating be on?
In an insulating glass unit, surfaces are numbered from outside in. In double glazing, surface 1 faces outdoors, 2 is the cavity side of the outer pane, 3 is the cavity side of the inner pane, and 4 faces the room.
A solar control coating usually goes on surface 2, reflecting solar heat at the outer pane; a heat control coating usually goes on surface 3, reflecting room heat back inside. In Şişecam Isıcam S units the coating is on surface 2 or 3. Triple glazing can have one coating per cavity.
The effect of Low-E glass shows in the U-value. A manufacturer technical note gives 2.7 W/m²K for uncoated 4-16-4 double glazing; for a 4+16+4 unit with Low-E glass, Şişecam gives 1.3 with air and 1.1 W/m²K with argon.
Low-E glass at Salt Cam
Salt Cam has operated since 1930. Its head office is in Mersin and its production plant is in the Mersin Tarsus Organised Industrial Zone; it has 51,000 m² of covered area in total. It produces and sells Low-E glass and insulating glass units, and is an authorized Şişecam dealer.
Prices are not listed because glass prices change often. The price depends on coating type (heat or solar control), glass thickness and size, whether tempering is needed, and order quantity. For a quote, call +90 324 324 39 39 or email saltcam@saltcam.com.
Heat control vs solar control Low-E glass
| Feature | Heat control Low-E | Solar control Low-E |
|---|---|---|
| Main job | Keeping room heat inside | Keeping heat in and limiting solar heat entry |
| Solar heat in winter | Lets most of it in | Lets less of it in |
| Suitable climate and facade | Cold climates, facades gaining solar heat | Hot climates, facades overheating in summer |
| Coating surface in double glazing | Usually surface 3 | Usually surface 2 |
| Şişecam product name | Şişecam Low-E (Isıcam S series) | Şişecam Solar Low-E (Isıcam K series) |
Surfaces are numbered from outside in. The product names belong to Şişecam.
Applications
- Residential windows
- Curtain walls
- Office and commercial building glazing
- Sun-facing facades that heat up in summer
- Glass balconies with insulating glass
- Roof and ceiling glazing
Related standards
- EN 673
- Gives the calculation method for the thermal transmittance (U-value) of glass; U-values of units with Low-E glass are given by this method.
- TS EN 1096
- Turkish adoption (TS, Turkish Standard) of the standard covering coated glass used in buildings.
- TS EN 1279
- Turkish adoption of the standard for the insulating glass units in which Low-E glass is used.
Frequently asked questions
What is Low-E glass?
Low-E glass is float glass with a thin coating that reflects heat radiation back. The name comes from low emissivity. It lets visible light through and reduces heat passing through the glass. It is mostly used inside an insulating glass unit, on a surface facing the cavity.
Does Low-E glass really save energy?
Yes, it markedly cuts heat passing through the glass. A manufacturer technical note gives 2.7 W/m²K for uncoated 4-16-4 double glazing; Şişecam gives 1.1 W/m²K with argon for its 4+16+4 unit with Low-E glass, and says its Low-E Isıcam S series cuts heat loss by 50% versus ordinary double glazing.
How can you tell if glass is Low-E?
Hold a light close to the glass and look at the reflections. A manufacturer technical note says double glazing shows four; if the unit has Low-E glass, one has a different color, while uncoated glass shows four of the same color. The coating itself is almost invisible. For certainty, ask for the glass name and its EN 673 U-value on the sales documents.
Can solar control Low-E glass be tempered?
Yes, some solar control Low-E glass is made for tempering. For places needing safety glass, Şişecam offers an Isıcam K series option with Şişecam Temperable Solar Low-E glass; the S series has a Temperable Low-E option. Specify a temperable type when ordering glass to be tempered. Cutting, drilling and edge work come before tempering.
Can Low-E glass be used as single glazing?
Soft-coated Low-E glass is not used on its own: moisture and air affect the coating, so it must sit inside an insulating glass unit, facing the sealed cavity. Hard (pyrolytic) coatings are more durable, but they insulate less well than soft coatings.
Does Low-E glass block cell phone signals?
Low-E glass can weaken cell phone signals. Low-E coatings are thin metal and metal oxide layers, which can block radio signals, so reception may be weaker in buildings with Low-E glass and no indoor antenna system.
Request a quote for price and sizes
Glass prices change frequently, so we do not publish prices. Send us your sizes, glass type and quantity and we will send a quote.
Related products
Sources
- Low emissivity, Vikipedi
- Insulated glazing, Vikipedi
- Low-E glass, Guardian Glass
- Optimal Low-e Coating Placement for Double- and Triple-Glazed IGUs, Vitro Architectural Glass
- Isıcam Nedir?, Şişecam Isıcam
- Isıcam Sistemleri S Serisi, Şişecam Isıcam
- Isıcam Sistemleri K Serisi, Şişecam Isıcam
- Tempered glass, Vikipedi
- BS EN 673:2024 Glass in building, Determination of thermal transmittance (U value), Calculation method, BSI
Written by: Salt Cam Technical Team · Last updated: 16.11.2026